Ancel BA101 Battery Tester

Ancel BA101 Battery Tester is a professional-grade, 12V digital battery analyzer designed for both automotive DIY enthusiasts and professional technicians. It uses advanced conductance testing technology to provide a highly accurate assessment of a battery’s health without requiring a full charge before testing. Key Features Comprehensive Battery Support: Works with a wide variety of 12V lead-acid batteries, including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, and EFB batteries. 4-in-1 Diagnostic Functions: Battery Test: Analyzes the State of Health (SOH) and State of Charge (SOC). Cranking Test: Evaluates the starter motor by measuring cranking time and voltage. Charging Test: Checks the alternator’s performance under different load conditions. Quick Test: Allows for a rapid 1-second health check simply by entering the battery’s Ah value. Plug-and-Play Design: The device is powered directly by the vehicle’s battery, meaning no internal batteries or charging are ever required. Safety First: Built-in polarity reverse protection ensures that even if you mix up the clamps, neither the tester nor the vehicle’s electronics will be damaged. Printable Reports: Connect the device to a computer via the mini-USB port to upload and print test results for record-keeping. Technical Specifications Feature Specification System Voltage 12 Volts Operating Voltage Range 9V – 15V DC CCA Measurement Range 100 – 2000 CCA AH Measurement Range 30 – 220 AH Standards Supported CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB Display Backlit LCD Monochrome Screen Operating Temperature 0°C to 50°C (32°F to 122°F)   Ancel BA101 Two Built-in Multi-Language Version 1.European Version: English, Spanish, French, German, Italian, Polish 2.Asian Version: English, Japanese, Korean, Chinese ONE-CLICK QUICK TEST It can make sure the battery status, including voltage, CCA, electronic resistance, rated CCA, charging value, healthy value and testing result in one second. Enter the AH value—battery rated capacity, which is marked in the label of the battery. 1). Press UP/DOWN key to select the Quick test, then press ENTER key to confirm. 2). Input the rated battery capacity—xx AH, in general, the battery capacity for 12V vehicle is above 30AH. 3). Then press enter key, the testing result will show one of these, as below Battery test result includes 5 types as following: Ancel BA101 Battery life analysis and result 1.Good Battery: The battery is without any problem, please be relaxed to use 2.Good Recharge: Good battery but low current, recharge before using. 3.Replace: The battery is near to or already reached the end of the using life, replace battery, otherwise, bigger danger will be followed. 4.Bad Cell Replacement: Battery interior damaged, bad cell or short circuit, replace battery. 5.Charge-retest:Unstable battery shall be recharged and retested to avoid error Test interface display Ancel Solar Battery Tester Operating Parameters 1.System voltage: 12 Volts 2.Input voltage range: 9V~15V 3.Power requirements: No internal batteries required. 4.AH range: 30-220AH Ancel Solar Battery Tester Application Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major supported battery standards are; JIS, SAE, EN, DIN and IEC . Ancel BA101 Test Data Print Out for WIN7 1.Please leave us email address to get the print out drive and software for laptop or download in Our Ancel official net : https://www.anceltech.com/ Pros and Cons Pros: High Accuracy: Boasts a 99.6% accuracy rate in diagnostic results. Lifetime Free Updates: Software can be updated for free via the official Ancel website. In-Vehicle Testing: No need to remove the battery from the car to get a reading. Cons: 12V Only: The standard BA101 cannot test 6V or 24V systems (though the BA101 Pro and BA101 Plus models address this). Monochrome Screen: The display is a basic black-and-white LCD, which feels a bit dated compared to newer color-screen models. What’s in the Box? Ancel BA101 Battery Tester (with integrated heavy-duty clips) USB Cable (for PC connection/printing) User Manual